If you’re not planning on using your hot tub this winter (unthinkable, I know), you’ll want to winterize your hot tub. Winterizing prevents your hot tub from freezing overnight during low temperatures. To winterize a hot tub, turn off the power, drain all the water, clean the filters and shell, and secure the cover.
If you plan on using your hot tub to warm up your winter nights, great! You don’t need to winterize a hot tub unless you plan on leaving your hot tub unattended for 6 weeks in a row or longer. This is typical if your hot tub is at a vacation home or cabin that you won’t be visiting frequently.
We recommend having your local authorized Bullfrog Spas dealer winterize your spa. But here are the steps to take if you choose to do it yourself. Note that the Bullfrog Spas warranty will not cover damage caused by improper winterization of a spa.
Let’s go over the steps for preparing your hot tub for winter
1. Gather hot tub cleaning supplies and products
- Super sanitizing agent to clean water
- Garden hose to drain water
- Wet shop vacuum to get remaining water out
- Filter cleaner
- Shell and cover cleaner
- Propylene glycol antifreeze for pipes
2. Super sanitize (shock) the spa water
Shocking the spa water will slow bacteria, algae, and fungi growth in areas of your spa that aren’t completely free of water after you drain and winterize.
To super sanitize the water, add one of the following:
- Granular chlorine (2 teaspoons per 200 gallons of water)
- Granular bromine (4 teaspoons per 200 gallons of water)
- Non-chlorine shock (5 teaspoons per 200 gallons of water)
We recommend super sanitizing your spa regularly, not only when winterizing your hot tub. This will make the water less cloudy, remove bacteria, and prevent odors in your spa. Shocking your spa with a non-chlorine shock can be done weekly if you frequently use your spa. A chlorine shock is best every quarter when you deep clean your hot tub.
3. Turn off the hot tub
For safety reasons, make sure there is no power getting to the hot tub. Press the power button, unplug the power cord, and turn off the circuit breaker.
4. Drain and dry the hot tub completely
- To drain your hot tub, pull the drain out of the spa and remove the drain cap. Attach a garden hose to the drain spout to activate the drain. Once the hot tub water is completely drained, pull the spout all the way out, remove the hose, replace the drain cap, and push the drain back into the spa.
- If you have a Bullfrog Spa with JetPaks, open all lower valves on the JetPaks to allow the water to drain from each JetPak as you drain the spa. Once the water is completely out of the spa, close each JetPak valve.
- Next, use a wet shop vacuum to vacuum the plumbing lines by placing the vacuum nozzle over each of the jet faces in the spa. It’s not a bad idea to do this twice, just to be safe.
- Finally, remove the drain plug from the pump, loosen all PVC pipe unions, and pump air-bleed valves in the equipment compartment. Replace the plugs on the heater pump. Do not replace the plugs on Pump 2. Tighten the unions or close the air-bleed valves until you de-winterize the spa in the Spring.
5. Remove and clean filters
Remove the filters from the spa and drain any water in the filter slot. We recommend cleaning your spa filters now and storing them in a clean, dry place until Spring.
6. Add antifreeze
Pour propylene glycol antifreeze into the filter hole to prevent the pipes from freezing. Some smaller spas may only require 1-2 gallons, medium sized spas generally require 3-4 gallons, and large spas and swim spas generally require 5-6 gallons. This is an added safety measure in case you were not able to empty all the water out of the spa.
WARNING: Do not use ethylene glycol antifreeze (the kind used in cars), as it is toxic. Propylene glycol (the kind used in RV’s), is nontoxic and does not require evacuation at startup.
7. Clean the shell and cover
Clean and protect the outside of your cover with a weather-resistant cleaner such as 303 Aerospace protectant. This will help your spa cover keep its color and protect it from damaging UV rays and other weathering.
8. Cover your spa
Make sure your spa cover is tightly secured to keep out rain or snow. If you live in an area with strong winter winds, consider purchasing some Hurricane Spa Cover Straps to keep your cover extra secure.
If you live in an area where snow is frequent, place a large piece of plywood on top of the spa cover to help support the weight of the snow. Be sure to remove any snow off the cover after each snow storm.
What To Do If Your Hot Tub Freezes
If you forget to winterize your spa and it ends up freezing, you’ll need to thaw all the ice and check for damage, leaks, and cracks.
To do so, turn off the hot tub, carefully break through the ice, and remove as much of it as you can. You can pour hot water onto the ice to speed up the melting process.
Once you have removed the ice, inspect the pipes, heater, and pumps for cracks or other damage. If you notice anything wrong, we recommend contacting your local authorized spa dealer for help.
If you don’t find any damage, turn the spa back on and check for water leaks. Your hot tub should be fine if you don’t find any leaks, but we advise keeping a close eye on it for a few weeks to make sure there were no undiscovered issues.
How To De-winterize Your Spa in the Spring
To enjoy your hot tub again in the Spring, clean any areas that have gotten dirty throughout the winter. And even though you used a non-toxic antifreeze, it still is a good idea to get it out of the pipes so it doesn’t irritate your skin. To clear antifreeze out of your plumbing, partially fill the hot tub with water, run the pumps for a few minutes, and then drain.
Reconnect the pumps and heaters, open the air-bleed valves, and close the drain valves. Refer to your owner’s manual or call your spa dealer for any questions you might have.
To finish de-winterizing your hot tub, simply replace the filters, refill the water, super sanitize it, turn the power back on, and jump in.
